| Customization: | Available |
|---|---|
| Application: | Machinery&Hardware |
| Type: | High-Speed Slitting Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Specifications | |
| Category | Automatic Shaftless & Coreless Paper Slitter Machine |
| Application Material | Regular Papers,Kraft Paper, Bond Paper, Paper Board,Non-woven Cloth, Film, Aluminum Foil, Plastic Sheet etc. |
| Applicable Width of Axial / Material | 600mm ~ 2800mm /23.6-110" (Customizable) |
| Min. Width of Slitting | 10mm (Depending on kinds of source material are applied) |
| Max.Machine Speed | 300m/min (Depending on kinds of material applied) |
| Max.Unwinding Diameter | 1500mm /59" |
| Max.Rewinding Diameter | 1500mm(Customizable) |
| Tolerance of Slitting Width | ±0.15mm(Depending on kinds of material applied) |
| Max Applicable Weight of Material | 4000 Kg (Customizable) |
| Rated Frequency | 50Hz & 60Hz |
| Rated Voltage | 380V,415V, 440V, 460V, 480V,or Dual-Voltage (Customizable) |
| Unwinding/Rewinding Shaft | Shaftless unwinder & Pneumatic Air Expanding Shaft |
| Overall Dimensions | 2000 x 2500 x 1500mm |
| Weight | 4000kg |
| Environmental Restriction | |
| Location | Indoor. The product should be installed on flat and solid foundation. |
| Voltage Regulation | ±10% |
| Frequency Regulation | ±5% |
| Ambient Temperature | -5°C~40°C |
| Altitude | Not exceed 1000 Meters |
| Relative Humidity | Less than 85% RH (Non-Condensation) |
| Components | |
| Unwinding Section | -Shaftless unwinder,the cam size is 3''&6'' -Hydraulic automatic lift-up loading system -Tech Mach analog EPC from USA -RE Brake from Italy -Tech Mach Floating roller constant tension from USA -Tech Mach Sensor from USA -Self expandable chuck -Guide & Slide AMT from Taiwan |
| Slitting Section | -Choices of Razor cutter or Disc cutter -Disc Cutter Assembly adopt the cam self-locking -Cutter with adjustable and moveable blade base. -Meter counter |
| Rewinding Section | -3"air expanding rewinding corelessshafts -Center Rewinding technology -Pressure roller -Electromagnetic Clutch from Taiwan |
| Controlling Section | -Siemens PLC & HMI from Germany -All the parametersare displayed on the monitor -Low voltage electrical appliances all from Schneider |
| Trimmed Waste Edge | -Edge Waste Blower with Expulsion Tube |
| Optional | -Friction Differential Shaft for rewinding. -Safety guard for the slitting device. -Emergency Switches on the 4 corner of machine. |
| Configuration | |||
| Name | Model | Pieces | Remark |
| Computer System | PLC(Siemens)+4DA+7''Touch Screen(Taiwan)+ Synchronic(Korea) | 1Set | Siemens+ Weinview |
| Motor | 2 Sets | FUKUTA From Taiwan | |
| Frequency Inverter | 2 Sets | YASKAWA From Japan | |
| Upper/Lower Round Knife | 10 Sets | Jota Machinery | |
| Brake | RE Brake from Italy | ||
| Sensor | 2 Sets | Tech Mach Sensor from USA | |
| Tension control | 3 Sets | Tech Mach Floating roller constant tension from USA | |
| EPC | 1 Set | Tech Mach analog from USA | |
| Chuck | Self expandable chuck | 1 Set | From Taiwan |
| Photocell Tracking | 2 Set | SIKC From Germany | |
| Magnetic Clutch | 2 Sets | From Taiwan | |
| Low Voltage Electrical Switch | SCHNEIDER | ||
| Blower | 1 Set | China | |
){kind=link}